How to Fix potential Windows Update Database Error Detected

In the vast world of computing, a common issue faced by the maximum population is windows update errors. Suppose you are receiving a message like a Potential Windows Update Database error. In that case, it means there is some unusual disturbing or wrong registries inside Windows 10 preventing your operating system from accessing the C:/windows folder.

In this step-by-step guide I will show you all the process by which you can How to Fix potential Windows Update Database Error Detected in your Windows 10 Computer.

You have an option to run the troubleshoot or refresh your pc to correct the problem immediately or you will look for the dedicated windows 10 errors hub to fix the similar issues occurring in your pc.
Before moving ahead, we must be aware of the term potential windows update database error detected. the presence of this error indicates that your operating system unable to access the c:/Windows folder. It is generally due to some bad registries inside the windows 10 system.
When you are engaged in repairing your Windows 10 update feature, you might receive the message potential windows database error is detected. These specific issues or similar issues can be fixed by performing the following steps enlisted below to avoid the arrivals of the errors in Windows 10.

The potential windows update database error, but there are also many other issues faced by Windows 10 users. We are going to study some of those issues you might encounter while using windows 10.

• Windows update database error 0x800f081f: this error may occur with some error codes as many of the windows 10 users reported 0x800f081f code along with this message.
• Windows update database error update service not running: according to the users who reported this issue, it seems that the update service is not running on the Windows 10 PC.
• Repair windows update database corruption failed: -the windows 10 users might face issues with the windows update database .there might also be an error. The windows 10 users were unable to perform the repair process.
• Windows update database error registration is missing or corrupt: This is the same problem with another message appearing on the screen. It will be fixed after following our guide provided in this post.
• Windows update database error code 80072ee2: this error message likely comes with an error code reported by the windows 10 users
• Windows update database stuck: the users of Windows 10 reported that the issues with the windows update might also occur and the database was stuck due to a specific issue.

Fix potential Windows Update Database Error Detected

Run the Troubleshooter

1. Open the Search bar by moving the mouse pointer to search icon just near the Start Menu icon in the Windows 10 taskbar.
2. Go the search box present in the taskbar of Windows 10.
3. Enter Control Panel in the search box.
4. Click on the Control Panel icon.
   
5. Now you can see the Troubleshooting option on your screen—Left-click on the troubleshooting feature.
   
6. Left click on the view all button present on the left side of the screen
   
7. Now your Windows 10 screen appears full of options, left click on the Windows Updates.
   
8. Look for the Next option on the lower side of the window and lest click on it.
   
9. Just follow the instructions appearing on your window 10 screen to complete the windows update troubleshooter.
10. Finish the troubleshoot process and then reboot your pc.If you still face the issue, try again and see the result.

Refresh your Windows 10 PC

1. Go the Settings options in Windows 10.
   
2. Tap on Update and Security and navigate to Recovery on the left side on the windows.
   
3. Click on Get started under reset this PC tab.
   
4. You will see two options on your screen, select Keep my files from those options and it will remove all the applications and settings from this Windows 10 PC, and your files will be untouched (it will not be deleted) in short, your pc will be refreshed.
   

Try this method again if you face the same problem again.

Perform an SFC scan

If you are a windows 10 user and facing a similar error message, you can fix the problem by just performing an SFC scan as it will help you to fix the file corruption, which may be the possible reason for this error.

Steps to follow:

1. On your keyboard, press Windows key + X. Go to the Windows PowerShell as admin from the list appearing on your screen. You can also use Command Prompt as admin in place of Windows PowerShell if it is not available.
   
2. When command prompt gets started, enter sfc /scannow and press the enter key to run it. The scanning process will begin now. It will take about 15 minutes to finish the scanning.
   
3. When scanning is completely over, check if the problem still exists or not. If it exists, try using DISM scan .just open the Windows PoweShell or Command Prompt as admin and run DISM /Online /Cleanup-Image /RestoreHealth command. DISM will take approx 20 min to finish the scanning process.

Restart Windows Update Service and rename the affected files

One of the very convenient ways to fix this error is by simply disabling the update service and renaming the affected directories. Follow these steps to fix the issue

• Open the command prompt as administrator from the start menu by typing command prompt  the search bar.
• When command prompts opens on your screen, enter the following commands;
• net stop wuauserv
• net stop cryptSvc
• net stop bits
• net stop msiserver
• ren
• {C:windowsSoftwareDistributionSoftwareDistribution.old}
• ren
• {C:windowsSystem32catroot2Catroot2.old}
• net start wuauserv
• net start cryptSvc
• net start bits
  net start msiserver
• Restart your pc now and try to install windows updates again.

Perform a clean boot

One of the possible reasons for the error occurring might be the third-party applications. As the third party application might interfere with windows ten and cause the error.
perform the following steps to perform a clean boot.

1. On your keyboard, press Windows key +R and enter msconfig, and click on OK.
   
2. Navigate to the services tab and check to Hide all Microsoft services. Tap on the Disable all button.
3. Visit the startup tab and click on the open task manager.
4. A list appears on your screen. Right-click on the first application on the list and select disable. and perform the same step for all the options enlisted.
   
5. Open the system configuration windows again and tap on Apply and OK. If you are asked to restart your pc, click on the restart now option.

Windows Update Database is located in c: or the system drive you can find it here:

I hope it solves the problem and if still if causing problems try upgrading your Windows Operating System or install a fresh Windows 10 on your Laptop or PC.

More From Digital Dopes

• How to Fix Vertical or Horizontal Lines on the Laptop
• Fix CTF Loader in Windows 10
• How to fix Microsoft System Protection Background Tasks in Windows 10
• How to Reinstall Mouse Drivers in Windows 10